|
| GO TO CODE 3' S WEBSITE |

|
| WWW.CODE3PSE.COM |
WE SELL ALL OF CODE 3'S PRODUCTS. IF YOU DON'T SEE WHAT YOU NEED,
JUST GIVE US A CALL OR SEND US AN E-MAIL AND WE WILL BE HAPPY TO HELP.

RX 2700 SERIES
-
12 PriZm LED lightheads in each corner position
-
8 LED or 3 LED directional PriZm lightheads in front and rear positions
-
55w Halogen takedown lights
-
35w MR-11 Alley lights
-
Easy to install LIT3 Mounting platform (included)
-
Several configurations to choose from
-
Low power Dimming mode
-
Variety of flash patterns | |
|
|
|
|
Various length NarrowStik from 5-11 heads available
Clear or colored top lens caps
Red, Blue, Amber, White or Green LEDs
Dual-stacked optics 3 LED LP (Low Profile) available with NarrowStik applications
Lighted LIT3 Mounting Kit (LED and/or 55w halogen)
N-3 Emitter
12 LED PriZm lightheads in front and rear positions | |
|
|
- 12.2"w x 2.7" h
- 36", 47", 58", 69", 80" and 91" lengths available
- 10-16 VDC, reverse polarity protected
- 5-year warranty on LED modules
- Meets all applicable SAE, NFPA and California Title 13 specs when properly configured
|
TX 2500 SERIES
- Low Profile (LP) LEDs provide a bright, powerful signal
- Proven 2100 lightbar design
- Clear lenses and the absence of color make the unit inconspicuous until illuminated
- Built-in flasher synchronizes left and right sides of the lightbar in two alternating modes: Wig-Wag and Variflash
- Easy to install LIT3 mounting platform
| |
|
|
|
- Six or eight head NarrowStik
- Lighted LIT3 mounting kit (LED and/or 55w Halogen)
- 940 Flasher for alley and takedown lights
- Forward and/or Rear facing 3-up LED; Steady flashing, in Center section, with independent flash & control
- N-3 emitter in center section
| |
|
|
- 5-year warranty on the LED modules
- 36", 47", 52" and 58" lengths available
- 12.25"W x 2.1"H
- 12 volt
- Meets all applicable SAE, NFPA and California Title 13 specifications when properly configured
|
XT3 LED SERIES
- XT302 offers 22 flash patterns
- XT304 offers 31 flash patterns
- Clear lens with red, blue, amber or white LEDs
- Shock and water resistant, potted circuit board
- Available in one or two color combinations
| |
|
|
|
- Mounting brackets available for: deck mount, grille mount, prisoner partition mount, license plate mount or trunk lid
mount
| |
|
|
- Black bezel
- XT302: 7.13" L x 1.25" H x 1.875" D
- XT304: 14" L x 1.25" H x 1.875" D
- 12/24 volt
- 5 year warranty on LEDs
- Amber and red LEDs meet SAE J845, Class I
- Blue LED meets J845, Class II
|
STILETTO LED SERIES
- Twelve LEDs alternate in a 75 flash-per-minute pattern
- Quick and easy installation - mounts virtually anywhere inside the vehicle
| |
|
|
|
- Model 185F-RR - Red
- Model 185F-BB - Blue
- Model 185-AA - Amber
- Model 185F-RB - Red/Blue
| |
|
|
- 8-1/2"L x 1-1/2"D x 1-1/4"D
- Input voltage - 10.5 to 16 VDC
- Current @ 12.8 VDC - 0.13 amps
- Temperature - -22°F +- 149°F
- Simple two-wire power connection
- Mounts with 4 sheet metal screws (not included)
- 1-Year warranty
|
|