|
JUSTICE L.E.D LIGHT BAR (50")
|
| CLICK ON THE IMAGE TO SEE VIDEO OF THIS PRODUCT |
High performance, cost competitive Super-LED® lightbar with a wide
range of options, designed for ease of operation, upgrade and serviceability.
FEATURES
· Front, rear and all bar operation control
· Optional Scan-Lock™ flash patterns
· Pattern override feature
· Alley lights
· Take-downs or flashing takedowns
· Low power operation
· Optional Traffic Advisor with control head
SPECIFICATIONS
· Twelve inches wide and only 2 1/4" high (without mounting feet).
· Three standard lengths 44", 50", 56" plus a 62" Wrecker Bar.
· Black polycarbonate base on an extruded aluminum platform. Clear outer lens standard with a moisture resistant
compression fit gasket. Color lenses available.
· Standard CON3™ lighthead modules with removable optic spreading filters.
· Center section available with single CON3 or two LTR3s™ (for split color center section).
· Corner modules available with 6 or 9 Super-LEDs®.
· Standard passenger side cable, driver side optional.
· Service oriented. Change colors, upgrade or service lightbar in the field.
· Simply remove four screws to access any section of the lightbar.
· Replace any lighthead by removing one screw and single connector.
· Wrecker Lightbar, standard 62" Competitor Series model with rear work and brake/tail turn lights.
LIBERTY L.E.D LIGHT BAR
|
| CLICK ON THE IMAGE TO SEE VIDEO OF THIS PRODUCT |
FEATURES
Once the ECM is programmed, selection
of
these wires will allow:
■ Complete independent “On” or “Off” control of each lighthead.
■
Flash pattern control of each lighthead.
■ Phase control of each lighthead with four phases for alternating, simultaneous
and combo flash patterns.
■ Cruise light control with virtually unlimited adjustable intensity levels.
■
Independent Hi/Lo control is available to any Super-LED lighthead, except the four corner modules (required for SAE certification).
■
Independent (sequential) control of the traffic arrow functions (left, right, split) without a Traffic Advisor™ control
head.
■ SW Series is the next generation of our industry first 2-wire serial (B-Link™) system introduced over
12 years ago.
LIBERTY™ SW FEATURES
■ LFL Liberty SW
Series has all the advantages of the latest generation all Linear-LED® technology: extremely low profile, 2.5” high,
maximum “heads up” warning, heavy-duty long life operation, low current draw, easily upgradeable and re-programmable.
■
At the heart of the new SW system is the WeCan Electronic Control Module (ECM). All functions are programmed via simple “pick
and click, or drag” screens. Windows® based 2000, XP or later operating system required. SB input to the ECM from PC
or laptop makes programming easy.
■ With the SW Series, you can control the function of each individual lighthead
any way you want, any time you want! Each individual lighthead can be selected, assigned both a flash pattern and a flash
“phase”. The flash phase synchronizes the chosen flash pattern from lighthead to lighthead.
■ The four
extended Linear Super-LED corner modules are standard. Add at anytime up to 12 Super-LED modules for a total of 16 modules.
■ Build your lightbar in any LED color combination with optional Linear-LED inboard warning lights, halogen flashing
take-down lights in any position, MR11 flashing alley lights, rear halogen worklights and rear LED brake/tail/turn lamps.
■
Electronic I/O board ensures equal light intensity from each lighthead.
■ Other options are five or six lamp full
size or split Traffic Advisors™ with high intensity Linear Super-LED modules & white high intensity LED take-down
lamps.
■ Clear outer lenses are standard, color lenses optional.
■ Pre-wired with 15’ passenger side
cable exit.
■ Five year Heavy-Duty Professional warranty on LEDs and electronics.
■ All models exceed California
and SAE requirements.
SPECIFICATIONS
■ Width - 43.12" (110cm), 48.5" (123cm),
53.99" (137cm)
■ Height - 2.5" (64mm), 4" (101mm) with feet
■ Depth - 12" (304mm)
14 L.E.D. Head Light Bar
Takedown and Alley Lights
Mounts and Vehicle Adapters included
SLIM-MISER L.E.D
|
| CLICK ON THE IMAGE TO SEE VIDEO OF THIS PRODUCT |
Whelen reliability in an economical but highly effective LED dash light. Available in single color,
red, blue or amber and split colors of blue/red and white/red. LEDs features low amp draw and provide long life and are rated
for 100,000 hours of operation. Lightweight polycarbonate housing with rounded corners is safer in the event of an accident
or airbag activation.
FEATURES
•
High performance/low cost warning.
• Available in single or split colors. Red is always on the driver's side.
•
Low current consumption.
• Brilliant 5mm LEDs in a slim, low profile designed housing allows mounting to almost any
angle windshield without blocking view.
• Swivel mount with three suction cups securely hold dash light to the windshield
• minimizing flash back.
• Change flash patterns via push button on back of product.
• Ten Scan-Lock™
flash patterns to choose from, seven with Phase 1 and Phase 2, plus three others.
• Eight foot straight cord with
cigar plug and On/Off switch with LED "On" indicator.
295SLSA6 SIREN/LIGHT CONTROL
Model 295SLSA6 has a slide switch and push buttons to
control nine state-of-the-art, internal high-current solid state drivers. Includes 17 Scan-Lock™ siren tones. Each of
the 6 push buttons activate one 10 amp output. Slide switch activates a 20 amp circuit, and can be wired, via a dipswitch
to control a 3 position program pattern. The 6th position push button may be dipswitch set for momentary, 8 second timer,
latch-on/latch-off, or flasher modes. Controls most high current applications such as strobe power supplies, headlight and
brakelight flashers.
RESPONDER CON 3 L.E.D
Now a low profile,mini-lightbar that provides all the high performance LED warning and signalling benefits in a smaller
size that fits all your special applications. Super-LED modules in a rugged polycarbonate base are built to take the roughest
conditions and long hours you face. They're road tested,vibration and moisture resistant and use much lower current than other
warning lights. Put a Responder LP to work on your utility,security,fleet,construction or public works vehicle.
FEATURES
-
Class
1, SAE J845 Certified
-
100,000
hour rated life
-
6 Super-LED
modules:choose from Conical (CON3™) modules(R1LP Series) or Linear-LED®modules (R2LP Series)
-
Built-in
electronic flasher with 30 Scan-Lock™flash patterns plus 4 simulated rotating patterns (permanent mount versions only)
-
ActionScan™default
flash pattern
-
Permanent
mount includes 6" pigtail; magnetic mounts include 10' straight cord with cigar plug with On/OFF and pattern control switch
-
Polycarbonate
dome with smooth exterior will not gather dirt and dust
-
12 VDC
-
R1LP models:3.0
amp draw (peak), 1.2 amp draw (avg)
-
R2LP models:6.0
amp draw (peak), 2.4 amp draw (avg)
|
